Mazda 3 Bolt Pattern [2003-2022]

The Mazda 3 is a sporty and economical sedan. Mazda is known for producing vehicle that have a little pep in their step without breaking the bank. If you have never had to do any kind of work on your car, then you may not know the Mazda 3 bolt pattern.

All Mazda 3 sedans made between 2003 and now use the same 5×4.5 inches (5×114.3mm) bolt pattern and has lug nuts with a thread size of M12 x 1.5. This Mazda 3 uses 5 lug nuts that you should tighten to 108 ft lbs. The Mazda 3 has a center bore of 2.64 inches (67.1 mm).

The data above, while very useful, doesn’t tell you exactly everything that you may need to know. There’s a lot more information to learn about the Mazda 3 bolt pattern. That’s why we took the time to outline the bolt pattern in more detail for each generation below.

We will also provide some links to the exact lug nuts you can use for the Mazda 3. After that, we will explain the rim and tire sizes for each engine and trim configuration.

Mazda 3 Bolt Pattern

Mazda 3 Bolt Pattern
Year RangeBolt PatternCenter BoreLug NutsThread SizeTorque Specification
2003 – 20094.5 inches (5×114.3mm)2.64 inches (67.1 mm)5M12 x 1.580-108 lb ft
2010 – 20134.5 inches (5×114.3mm)2.64 inches (67.1 mm)5M12 x 1.580-108 lb ft
2014 – 20184.5 inches (5×114.3mm)2.64 inches (67.1 mm)5M12 x 1.580-108 lb ft
2019 – current4.5 inches (5×114.3mm)2.64 inches (67.1 mm)5M12 x 1.580-108 lb ft

Mazda 3 Wheel Fitment Guide

If you’re planning on doing any tire or wheel work on your car, then you will need to know more than just the Mazda 3 bolt pattern. Things such as the center bore diameter, thread size, and tightening torque are important thing to consider. Also, these things may vary from model to model.

There are various trim levels of this vehicle, so it’s important to make sure the parts you are looking to buy are the correct ones.

The great thing about the Mazda 3 is that all version of it have the same bolt pattern. That makes things easier to keep up with. There are, however, still plenty of other things that you need to know. So, here’s a few handy tables to make life a little easier.

2003 – 2009

The first generation Mazda 3 has 4 engine configurations. The 1.4L engine uses a tire size of 195/65R15 and a rim size of 6Jx15 ET52.5, 6.5Jx16 ET52.5, or 6Jx15 ET52.5. For the 1.6L engine, the tire size is either 195/65R15 or 205/55R16, with rim sizes of 6Jx15 ET52.5 and 6.5Jx16 ET52.5, respectively.

The 2.0L version of the Mazda 3 uses a tire size of either 195/65R15, 205/55R16, or 205/50R17, and it’s rim sizes are 6Jx15 ET52.5, 6.5Jx16 ET52.5, and 6.5Jx17 ET52.5.

Finally, the 2.3L version of the Mazda 3 uses either 205/55R16 or 205/50R17 tires, and use a rim size of either 6.5Jx16ET52.5 or 6.5Jx17 ET52.5
They all use a 4.5 inches (5×114.3mm) bolt pattern.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
1.4L84195/65R156Jx15 ET52.54.5 inches (5×114.3mm)
1.6L84195/65R15,205/55R166Jx15 ET52.5,6.5Jx16 ET52.5,4.5 inches (5×114.3mm)
2.0L84195/65R15,205/55R16,205/50R176Jx15 ET52.5,6.5Jx16 ET52.5, 6.5Jx17 ET52.54.5 inches (5×114.3mm)
2.3L84205/55R16, 205/50R176.5Jx16ET52.5,6.5Jx17 ET52.5
4.5 inches (5×114.3mm)

2010 – 2013

The second generation Mazda 3 has 4 engine configurations. The 2.0L engine uses a tire size of either 205/55R16, 205/60R16, or 205/50R17 with rim sizes of 6.5Jx16 ET50, and 6.5Jx17 ET50. The 2.5L engine has tires sizes of 205/55R16, 205/60R16, and 205/50R17, which use either a 6.5Jx16 ET50 or a 6.5Jx17 ET50. The super-fast 2.4L Turbo version of the Mazda 3 uses ultra high performance 225/40ZR18 tires and a 7.5Jx18 ET52.5 rim.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
2.0L I4148205/55R16, 205/60R16, 205/50R176.5Jx16 ET506.5Jx17 ET504.5 inches (5×114.3mm)
2.5L I4148205/55R16, 205/50R17, 215/45ZR186.5Jx16 ET506.5Jx17 ET507Jx18 ET504.5 inches (5×114.3mm)
2.3L Turbo I4167225/40ZR187.5Jx18 ET52.54.5 inches (5×114.3mm)

2014 -2018

The third generation Mazda 3 has 2 configurations. The 2.0L version of the Mazda 3 for this generation uses a tire size of 205/60R16 on a 6.5Jx16 ET50 rim. The 2.5L version, on the other hand, uses a tire size of 215/45ZR18 and a rim size of 7Jx18 ET50.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
2.0L I4155205/60R166.5Jx16 ET504.5 inches (5×114.3mm)
2.5L I4184215/45ZR187Jx18 ET504.5 inches (5×114.3mm)

2019 – 2022

The fourth generation Mazda 3 has 3 configurations. The 2.0L Mazda 3 for this model generation uses 205/60R16 tires mounted on a 6.5Jx16 ET45 rim. The 2.5L version uses either 205/60R16 or 215/45ZR18 tires mounted on either 6.5Jx16 ET45 or 7Jx18 ET45t rim. If you have one of the really nice 2.5L Turbocharged Mazda 3 sedans, then it uses a tire size of 215/45ZR18 and uses a 7Jx18 ET45 rim.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
2.0L I4152205/60R166.5Jx16 ET454.5 inches (5×114.3mm)
2.5L I4184205/60R16, 215/45ZR186.5Jx16 ET457Jx18 ET454.5 inches (5×114.3mm)
2.5L Turbo I4250215/45ZR187Jx18 ET454.5 inches (5×114.3mm)

What Does The Tire Size Mean?

The first number on the tire is its width in millimeters. If you have a P225/65 R15 tire has a width of 225 millimeters. The second number is the ratio of sidewall to width. So, a P225/65 R15 tire has a sidewall height of 146mm (225 * 0.65).

The letter is the tire’s road performance. R is pretty much standard, while the higher letters like Y and Z are reserved for ultra high-performance tires.

The most familiar is the last one on the tire size. This, of course, is the tire’s internal diameter in inches. So, a P225/65 R15 tire has a 15-inch internal diameter.

Generally speaking, a given rim can take various tires with slightly different widths. When it comes to the side wall, there is much more wiggle room.

Properly Tightening The Bolts

Mazda 3s use 5 lug nuts. The nuts have to be secured in a specific, crisscross pattern when you mount the wheel to the truck again. This information is commonly found in the vehicle’s user manual, but for the sake of convenience, we went ahead and put it here for you.

Tightening your lug nuts properly is very important. If you under-tighten the wheel, it could fall off when you are driving! If you over-tighten the wheel, it can make it hard to get off next time and it can damage components.

Tighten the lugs with a hand wrench first, but wait! Do not tighten your lug nuts all the way just yet. If you tighten them down now it will be hard to get each lug torqued down to its proper level. So, just tighten each one of your lugs about halfway.

Then, you’ll need to tighten them with a torque wrench to the proper ft-lbs. Both generations of Mazda 3 use the same 99.5 ft-lbs of lug tightening force.

Also, make sure to check to see if your lug nuts are properly tightened. To do so, drive for around 30 miles. Then, check your lug nuts. If any of them come loose, tighten them down one more time and do the test again. If the nuts come loose at all again, then you more than likely have a warped rim that needs replacing.

When To Rotate Mazda 3 Tires

The tires on a Mazda 3 will typically last about 75,000 miles or around 5 years. After this amount of time, they need to be replaced. There are cases in which this can happen a lot sooner, and there are certainly times where it can happen a lot later, but eventually, you are going to need to replace your tires.

You need to rotate your tires long before your tires wear out. As a matter of fact, if you rotate your tires properly, your tires will last a lot longer before you need to replace them. Like most cars, its best to rotate your Mazda 3 tires every 7,500 miles. Rotating your tires is simple. All you have to do is move the front tires to the back and move the back tires to the front, but swap the left and right sides while you are doing it.

Rotating your tires is just another example of why it’s important to know your Mazda 3 lug pattern. Another important thing to consider is the fact that when you are rotating your tires, you will have access to all the inner workings of each one of your wheels.

So, make sure to take a look at your control arms, brakes, and various other mechanical inner workings that are normally hidden by the wheel.

Conclusion

No matter what car you have or how well you take care of it, there will come a time where you need to work on it. So, its always good to know the Mazda 3 bolt pattern, the center bore, and what kind of wheels and tires they use.

All Mazda 3’s produced between 2003 and now use a bolt pattern of 5×4.5 inches (5×114.3mm). The Mazda 3 uses 5 lug nuts that have a thread size of M12 x 1.5 and it has a center bore of 2.64 inches (67.1 mm).. The recommended lug tightening toque for the Mazda 3 is 108 ft lbs.

We hope this article helped you learn more about the Mazda 3 bolt pattern. Thanks for reading!

Leave a Comment