If you have a car, you are quite familiar with the various mishaps that you are likely to be faced on the road. One of the factors that you should understand is that being prepared for an incident on the road is not a sign of weakness.
Being prepared to face any challenge that may face you on the road can make you drive without fear of any eventuality. This article provides you with great insights into how you can use recovery strap in your vehicle. This article provides you with great insights into how you can use recovery strap in your vehicle.
What is recovery strap?
A recovery strap is a rope that is specially designed to be used for pulling a vehicle especially when it cannot move or well it is has been damaged in an accident.
Recovery straps are made of nylon which makes them tough from snapping even when pulled with a high pressure.
The typical width of a recovery strap is approximately 2-3 inches, but lengths vary and there are some that come with a length of up to 30 inches.
However, the kind of strap that used on a vehicle depends on the type of vehicle. This means, when pulling small cars, a small strap will be used when large lorries will require wide and strong straps.
You may love to read: Can You Buy A Car Without A License? A Detailed Guide
When do you use a recovery strap?
There are various instances where you can use the recovery strap. However, recovery straps are mostly used when a vehicle has stuck in a ditch or mud.
Although there has been an innovation of vehicles with powerful engines and tires, vehicles still are likely to get stuck in a ditch.
Therefore, this means, there still an ever ending need for vehicle owners to continue keeping recovery straps in their vehicles.
How to use a recovery strap
When you want to remove your vehicle from a ditch, mud or any other place where it has been stuck, you should have some skills on how to go about it.
Then remember, when you want to remove a vehicle, you should have another vehicle in place that will be used to pull the other vehicle.
Lay the recovery strap on the ground to remove any twisted part. Remove any twisted part so that the rope can be tied without any difficulty.
Tie the rope on the one side of the vehicle in the ditch and the other side to the vehicle that will be used in pulling the other vehicle.
The rope usually comes with two hooks on both ends. The hooks are the amount on the rear bumper of both vehicles.
Although there are some vehicles which do not have a point for attaching on the bumper, another location is to find any strong point where you can attach the hook of the rope.
However, if you are not familiar with vehicles, you can always find an expert that can help you locate the right location for attaching the hook.
But it is advisable to avoid attaching on any part that can break when it is put under pressure.
When you have both hooks well connected to both vehicles, you are required to then take your position on the driver’s seat same to the driver of the other vehicle.
Therefore, both drivers should then start their vehicles and be prepared to start the pulling process. The pulling vehicle, should then slowly move in order to straighten the rope.
Once it is straightened, the pulling vehicle should add more force to make it easy to pull the other vehicle.
As the vehicle continued moving, the pulling vehicle should continue increasing speed to forcefully remove the other vehicle from the ditch.
How recovery strap works
Like I told you earlier on, recovery straps are made of nylon. Therefore, as the vehicle is being pulled from a ditch, it stretches making the other vehicle to yield to the pressure by coming out of the ditch.
As the other vehicle moves from the ditch, the other vehicle can also move again to further stretch the nylon rope, and the process continues.
Older vehicles usually came with towing hooks that made it easy to attach the recovery strap. However, nowadays, most of the vehicles do not come with towing hooks, therefore, it is upon your discretions to decide the right point to attach the rope.
It is advisable to ensure that the rope is attached to the frame of the vehicle.
Although the strap is made from nylon, it is, however, vulnerable, when it is subjected to pressure from rock or any other material. Therefore, it is important to ensure that the strap is not attached to any other materials that can damage it.
Drivers pulling vehicles from a ditch are advisable to start slowly and increase the speed gradually. This is because jacking forward can risk the strength of the nylon rope and cause it to snap.
Read Another post: How to Paint a Car: A Comprehensive Guide to Give your Car a New Paint
Additionally, it is important to ensure that you read through the instructions that have been provided by the seller. Usually, when you buy a recovery strap, you are provided with more details on how to use it.
Where to buy recover strap
Recover straps are very important. Therefore, there are various locations that you can locate them. You can buy the recovery strap from both online and offline stores.
Therefore are various online stores that you can easily buy a recovery strap for your vehicle. Just look for a trusted online dealer and place your order. You can directly purchase and get it delivered to your physical location or pick from the pick points.
However, the main advice is to ensure that you read through the various recovery straps to ensure that you get the right type and the right quality.
It is also important to ensure that you also examine the hooks of the ropes because they are an important part of the recovery rope.
Remember that a recovery strap is not meant to tow a vehicle to a long distance. Actually, the recovery strap is used to only pull a vehicle from the point where it is stuck. Although the recovery strap can be towed to a distance, it can ruin its strength.