Ford Taurus Bolt Pattern [1996-2022]

The Ford Taurus has a solid reliability rating of 4.0 out of 5.0. That is 6 out of 12 overall in the full-size car category. They are not the most reliable vehicles, as they have notorious issues with their front ends. The good news is that the average annual repair cost is just $697, so even though you will pretty much always be working on your Ford Taurus, at least it won’t cost you much.

A Ford Taurus from the third and fourth generations produced between 1996 and 2007 features a bolt pattern of 5×4.25 inches (5x108mm) and lug nuts that have a thread size of M12 x 1.5. This Ford Taurus uses lugs lug nuts that you should tighten to 100 ft lbs and it features a center bore of 2.5 inches (63.4mm).

If you own a fifth, sixth, or seventh generation Ford Taurus that was made between 2008 and 2009, then it uses a bolt pattern of 5×4.5 inches (5×114.3mm) and lug nuts with a thread size of M12 x 1.5. This Ford Taurus uses 5 lug nuts that should be torqued down to 100 ft lbs and has a center bore of 63.4mm.

The info above, although it is most certainly useful, doesn’t totally paint the whole picture. There is a lot more information to learn about the Ford Taurus bolt pattern. That’s why we took the time to outline the bolt pattern more extensively for each generation below.

We will also provide some links to the exact lug nuts you can use for the Ford Taurus. After that, we will elaborate on the rim and tire sizes for each engine and trim configuration.

Ford Taurus Bolt Pattern

Ford Taurus Bolt Pattern

Just like with any other car, there will come a time when you need to know the Ford Taurus bolt pattern. So, we went ahead and put all the important information into an easy-to-use chart for you below.

Year RangeBolt PatternCenter BoreLug NutsThread SizeTorque Specification
1996 – 19995×4.25 inches (5x108mm)63.4mm5M12 x 1.5100 lb ft
2000 – 20075×4.25 inches (5x108mm)63.4mm5M12 x 1.5100 lb ft
2008 – 20095×4.5 inches (5×114.3mm)63.4mm5M12 x 1.5100 lb ft
2010 – 20155×4.5 inches (5×114.3mm)63.4mm5M12 x 1.5100 lb ft
2016 – current5×4.25 inches (5x108mm)63.4mm5M12 x 1.5100 lb ft

Ford Taurus Wheel Fitment Guide

If you plan on doing any tire or wheel work on your car, then you are going to need to know more than just the Ford Taurus bolt pattern. Things like the center bore diameter, tightening torque, and thread size is important things to consider. Also, these things may vary from model to model.

There are various trim levels of Ford Taurus, so it’s important to make sure the parts you are looking to buy are the correct ones. So, here’s a table of all the available tire and rim sizes for the Ford Taurus:

1996 – 1999

The third-generation Ford Taurus has 1 engine configuration. These older Taurus sedans have a 3.0L DOHC V6 and use a tire size of 205/65R15 mounted on 6Jx15 ET42 rims.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
3.0L DOHC V6147205/65R156Jx15 ET425×4.25 inches (5x108mm)

2000 – 2007

The fourth generation Ford Taurus also has 1 engine configurations. A Ford Taurus from this year range use a 200 HP 3.0L DOHC V6 and has a tire size of 215/60R16 and a rim size of 6Jx15 ET42.

Engine SizeHorse PowerTire Size7sRim SizesBolt Pattern
3.0L DOHC V6200215/60R166Jx15 ET425×4.25 inches (5x108mm)

2008 – 2009

Like the ones before it, the fifth generation Ford Taurus has 1 engine configurations. The fifth gen Ford Taurus has a 263 HP 3.5L V6 and uses either 215/60R17 or 225/55R18 tires. Rim sizes for this configuration are 7Jx17 ET52, and 7Jx18 ET52.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
3.5L V6263215/60R17, 225/55R187Jx17 ET52, 7Jx18 ET525×4.5 inches (5×114.3mm)

2010 – 2015

The sixth generation Ford Taurus has 2 engine configurations. The 263 HP 3.5L V6 uses a tire size of either 235/60R17, 235/55R18, or 255/45R19 with a rim size of either 7.5Jx17 ET39, 7.5Jx18 ET39, or 8Jx19 ET44. The 240 HP 2.0L version of the sixth generation Ford Taurus uses a tire size of either 235/60R17 or 235/55R18 tires mounted on either a 7.5Jx17 ET39 or 8Jx18 ET39 rim.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
3.5L V6263235/60R17, 235/55R18, 255/45R197.5Jx17 ET39, 7.5Jx18 ET39, 8Jx19 ET445×4.5 inches (5×114.3mm)
2.0L EcoBoost I4240235/60R17, 235/55R187.5Jx17 ET39, 8Jx18 ET395×4.5 inches (5×114.3mm)

2016 – 2022

The eighth generation Ford Taurus has 2 engine configurations. Like the generation before, the 263 HP 3.5L V6 uses a tire size of either 235/60R17, 235/55R18, or 255/45R19 with a rim size of either 7.5Jx17 ET39, 7.5Jx18 ET39, or 8Jx19 ET44. Also like the prior generation, the 240 HP 2.0L version of the sixth generation Ford Taurus uses a tire size of either 235/60R17 or 235/55R18 tires mounted on either a 7.5Jx17 ET39 or 8Jx18 ET39 rim.

Engine SizeHorse PowerTire SizesRim SizesBolt Pattern
3.5L V6263235/60R17, 235/55R18, 255/45R197.5Jx17 ET39, 7.5Jx18 ET39, 8Jx19 ET445×4.5 inches (5×114.3mm)
2.0L EcoBoost I4240235/60R17, 235/55R187.5Jx17 ET39, 8Jx18 ET395×4.5 inches (5×114.3mm)

So, What Does The Tire Size Actually Mean?

The first number is the width of the tire in millimeters. So, a P205/65 R14 tire has a width of 205 millimeters. The second number is the ratio of sidewall to width. So, that means that a P205/65 R14 tire has a sidewall height of 133mm (205 * 0.65).

The letter is for a tire’s performance letter. R is the standard for the most part, while Y or Z-rated tires are ultra-high performance.

The final and most familiar figure is the tire’s internal diameter in inches. So, a P205/65 R14 tire has a 14 inch internal diameter.

After learning all that, you might think that a given rim can take more than just one type of tire. If so, then you are correct! A rim generally accepts a tire with a slightly different width than the original tire had. There is much more room when it comes to the sidewall ratio, as that figure can vary somewhat widely and still be compatible with a given rim.

Properly Tightening The Bolts

A Ford Taurus uses 5 lugs lug nuts. These nuts have to be secured in a specific, pattern when you mount the wheel to the car again. This information is commonly found in the vehicle’s user manual, but we put it here for you.

If you are into things like living, then tightening your lug nuts properly is obviously very important. If you under-tighten the wheel, it could fall off when you are driving, which has been shown by studies to increase the likeliness of the loss of life. Also, if you over-tighten the wheel, it can make it hard to get off next time and it can damage components.

The first step is to tighten the lugs with a hand wrench first, but not all the way. If you tighten them down now it will be hard to get each lug torqued down to its proper level. So, just tighten each one of your lugs about half way.

Then, you will need to tighten them with a proper torque wrench to the specified level. The ford Ford Taurus uses a 99.5 ft lbs of lug tightening force

Check Your Ford Taurus Lug Nuts 

It’s crucial to make sure that your lug nuts are not coming loose. A good way to check for this is to drive 30 miles or so and check your lug nuts. If any of them are loose, tighten them back down again. Do the test again, and if any of the lug nuts come loose, then you more than likely have a warped rim that needs replacing.

When To Rotate Ford Taurus Tires

Tires typically are going to last about 75,000 miles or around 5 years. After this amount of time, they need to be replaced. There are cases in which this can happen a lot sooner, and there are certainly times where it can happen a lot later, but eventually you are going to need to replace your tires.

You need to rotate your tires long before your tires wear out. In fact, if you rotate your tires properly, they will last just as long as they were supposed to. For the Ford Taurus, it’s best to rotate your tires every 7,500 miles. Rotating your tires is simple. All you have to do is move the front tires to the back and move the back tires to the front, but swap the left and right sides while you are doing it.

Rotating your tires another clear reason why it’s crucial to know your Ford Taurus lug pattern. Another important thing to consider is the fact that when you are rotating your tires, you will have access to all the inner workings of each one of your wheels.

This gives you time to take a look at your brakes and other things that are usually obscured by the wheel’s presence.

Ford Taurus Bolt PatternConclusion

There comes in time when ever car’s life where the owner has to work on it. So, its always a good idea to know your Ford Taurus bolt pattern.

If you’ve got a third or fourth-generation Ford Taurus made between 1996 and 2007, then it’s got a bolt pattern of 5×4.25 inches (5x108mm) and lug nuts that have a thread size of M12 x 1.5. These Ford Tauruses have a torque tightening specification of 100 ft lbs and has a center bore of 2.5 inches (63.4mm).

Fifth, sixth, and seventh generation Ford Taurus sedans that was made between 2008 and now, on the other hand, use a bolt pattern of 5×4.5 inches (5×114.3mm) and lug nuts with a thread size of M12 x 1.5. Ford Taurus sedans from this time frame uses 5 lug nuts that should be torqued down to 100 ft lbs and has a center bore of 63.4mm.

We hope this article helped you learn more about Ford Taurus bolt pattern. Thanks for reading!

Leave a Comment