Acura MDX Bolt Pattern (2001-2022)

The Acura MDX is among one of the best-rated luxury SUVs on the market. The MDX stands out as a 3-row crossover SUV known for reliability. In addition to that, the MDX is absolutely overflowing with luxury details and has a legendarily high resale value. No matter how luxurious, reliable, or value-retaining your SUV is, you are eventually going to need to know the Acura MDX bolt pattern.

If you own an Acura MDX that was manufactured between 2007 and 2013 or from 2017 to now, then it has a bolt pattern of 5×4.72 inches (5x120mm) and a center bore of 2.52 inches (64.1mm). This version of the Acura MDX uses 5 lug nuts that have a thread size of M14 x 1.5. For an MDX from this era, the lug nuts need to be tightened to 93.6 ft lbs.

If, however, your Acura MDX was made some time between 2001 and 2006 or any time between 2014 and 2016, then it uses a bolt pattern of 5×4.5 inches (5×114.3mm) and has a center bore of 2.52 inches (64.1mm). This MDX uses 5 lug nuts that have a thread size of M12 x 1.5 and need to be secured with 80 ft lbs of force. 

While this information sounds comprehensive, it does not tell you everything that you need to know. So, we have outlined the Acura MDX bolt pattern in more detail below for each generation. We will also tell you exactly what kind of lugs you need to get for your MDX. We will also elaborate on the diameter of the center bore hub, and we will go over the torque specifications of the bolts. Then, we will explain each tire and rim option that is available for each configuration for each respective Acura MDX generation. 

Acura MDX Bolt Pattern

Acura MDX Bolt Pattern
Year RangeBolt PatternCenter BoreLug NutsThread SizeTorque Specification
2001 – 20065×4.5 inches (5×114.3mm)2.52 inches (64.1mm)5M12 x 1.580 ft lbs
2007 – 20135×4.72 inches (5x120mm)2.52 inches (64.1mm)5M14 x 1.593.6 ft lbs
2014 – 20165×4.5 inches (5×114.3mm)2.52 inches (64.1mm)5M12 x 1.580 ft lbs
2017 – current5×4.72 inches (5x120mm)2.52 inches (64.1mm)5M14 x 1.593.6 ft lbs
Acura MDX Bolt Pattern

Wheel Fitment Specifications Per Generation

You are going to need to know a lot more than just the Acura MDX bolt pattern if you plan on mounting a wheel or tire onto your MDX. Below, we will go over all the various factors that you need to take into consideration. These are things like the center bore, lug torque, and the thread size of the lug nuts.

2001-2006

If your Acura MDX has the VTEC enabled 3.5L V6 engine, then it uses a tire size of 235/65R17 mounted on a 6.5Jx17 ET45 rim.

Engine SizeHorse PowerTire  SizesRim SizesLug Pattern
3.5L V6241 HP235/65R176.5Jx17 ET455×4.5 inches (5×114.3mm)

2007-2013

Acura MDX with a 3.7L VTEC V6 engine uses a tire size of either 255/55R18 or 255/50R19. Rim sizes for this generation are 8Jx18 ET45 or 8.5Jx19 ET45.

Engine SizeHorse PowerTire  SizesRim SizesLug Pattern
3.7L VTEC V6 300 HP255/55R18, 255/50R198Jx18 ET45, 8.5Jx19 ET455×4.72 inches (5x120mm)

2014-2016

Later, Acura ended up going back to a smaller engine for the MDX. So, if you have an MDX from this era, it’s going to use the 3.5L VTEC V6 engine and will have a tire size of 245/60R18 or 245/55R19. Rim sizes for this generation are either 8Jx18 ET55 or 8Jx19 ET55.

Engine SizeHorse PowerTire  SizesRim SizesLug Pattern
3.5L VTEC 290 HP245/60R18, 245/55R198Jx18 ET5, 8Jx19 ET555×4.5 inches (5×114.3mm)

2017-2022

If you have an Acura MDX with the 3.0 VTEC V6 engine, it uses a tire size of 245/50R20 and a rim size of 8Jx20 ET55. If, however, your Acura MDX from this era is equipped with the larger 3.5L VTEC V6 engine, then it has a tire size of 245/60R18 and a rim size of 8Jx18 ET55.

Engine SizeHorse PowerTire  SizesRim SizesLug Pattern
3.0 VTEC257 HP245/50R208Jx20 ET555×4.5 inches (5×114.3mm)
3.5L VTEC290 HP245/60R188Jx18 ET555×4.5 inches (5×114.3mm)

Properly Tightening The Bolts

The Acura MDXs use 5 lug nuts that you have to make sure are tightened in crisscross pattern to a specific torque level. You can always find this info in the Acura MDX user manual, but it’s nice to have everything all in one place, so we put it here for you as well.

Remember, if you tighten your lug nuts too much, it could make the wheel nearly impossible to remove next time and it could even damage components. On the other hand, if you don’t tighten the lug nuts enough, the wheel could fall off, which is never a good thing. 

The first thing you need to do is tighten the MDX lugs with a hand wrench. It’s important to not tighten the lug nuts down all the way just yet. If you do, it’s gonna be really hard to get your lug nuts all torqued down to their proper level. So, just tighten them down about half way at first to get them all on the bolts.

Then, you will need a proper torque wrench so you can tighten your Acura MDX lug nuts to the appropriate amount of pressure. For the most recent Acura MDX, the lugs need to be tightened to 93.6 ft lbs.

After that, it’s important to perform a lug nut test on your Acura MDX. This is something that is easy to do and it can save your life. Tighten your lug nuts 93.6 ft lbs and then drive for around 30 miles or so.

After that, check the torque on each of your lug nuts again. If any of them are loose, re-tighten them and repeat the test. If any of your lug nuts are loose after that, then it means that the rim is warped and needs to be replaced. 

When To Rotate Acura MDX Tires

The tires on just about any car or truck typically last around 75,000 miles or 5 years, whichever comes first. Miles are not the only thing that attacks your tires. The unfortunate reality is that after a few years, tires will begin to dry rot. After a certain point, they need to be replaced even if they don’t have many miles on them. 

The good news is that if you rotate your Acura MDX tires regularly, they will last a lot longer than if you did not. When it comes to the Acura MDX, it’s recommended to have the tires rotated every 7,500 miles or so. Rotating tires is easy. Just move the rear tires to the front and move the front tires to the rear. While you are doing so, also swap the left and right sides, and that’s all there is to it.

Conclusion

The MDX has it all. Third row seating, an excellent reliability record, and plenty luxurious amenities to keep any MDX driver happy. This is why the Acura MDX is the go-to crossover for the affluent. One way or the other, however, you are going to need to eventually learn your Acura MDX bolt pattern. 

If you own an Acura MDX that was manufactured between 2007 and 2013 or from 2017 to now, then it has a bolt pattern of 5×4.72 inches (5x120mm) and a center bore of 2.52 inches (64.1mm). This version of the Acura MDX uses 5 lug nuts that have a thread size of M14 x 1.5. For an MDX from this era, the lug nuts need to be tightened to 93.6 ft lbs.

If, however, your Acura MDX was made sometime between 2003 and 2006 or any time between 2014 and 2016, then it uses a bolt pattern of 5×4.5 inches (5×114.3mm) and has a center bore of 2.52 inches (64.1mm). This MDX uses 5 lug nuts that have a thread size of M12 x 1.5 and need to be secured with 80 ft lbs of force. 

We hope this article helped you learn more about the Acura MDX bolt pattern. Thanks for reading!

Leave a Comment